|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with all "00" models except 0012 (T0012012RP)
|
Set includes: 2 each flanges, 2 each flange gaskets, 4 each bolts with nuts
|
Set includes: 2 each flanges, 2 each flange gaskets, 4 each bolts with nuts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Set includes: 2 each flanges, 2 each flange gaskets, 4 each bolts with nuts
|
Set includes: 2 each flanges, 2 each flange gaskets, 4 each bolts with nuts
|
Pro-Fit[TM], 1/2" x 1/2" spring coupler, Cast zinc with steel reinforced eyelets, Fits all 1/2" motor shafts, Replaces Bell & Gossett and Armstrong pumps or parts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit[TM], Durable composite Noryl construction, Replaces Bell & Gossett and Armstrong pumps or parts
|
Set includes: 2 each flanges, 2 each flange gaskets, 4 each bolts with nuts
|
Pump Material: ABS housing, 24V, Includes 1" X 3/4" reducing bushing and 3/4" plug for auxiliary drain pan outlets, The switch/holder assembly is easily removed to enable cleaning of any clog in the line, 72" lead wires, Low voltage, cULus listed
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy duty concentric fan-cooled motor, Corrosion-resistant one-piece steel motor shaft, Moisture-proof windings, Oversized sleeve bearings with large oil reservoir, Universal mounting configurations, Low pump down and recovery levels, Flame retardant housing, Snap-off volute plate for easy cleaning, Mesh debris screen, Thermal overload protection
|
4.5" L x 9" H x 4.5" D, Connection: Barbed, Pump Material: Flame resistant engineered thermal plastic, 115V, Heavy-duty concentric fan-cooled motor with over-sized sleeve bearings and moisture proof windings, Flame retardant housing, Universal mounting configurations, Low pump down and recovery levels, UR listed
|
For use with 110 series
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GF 15/26, Dielectric isolation valve sets, Set includes: 2 each rotating flanges, 2 each lever handle ball valve, 2 each dielectric sleeve, 2 each EPDM gaskets, 4 each bolts with nuts
|
Heavy duty contacts, Mechanically activated wide angle switch provides direct control of pumps in potable water, water, and sewage applications, Controls pumps up to 1/2 hp at 120 VAC and 1 hp at 230 VAC, 13 amps running current and 85 amps starting current, Pump down (normally open) applications, Direct wire connection, Three-year limited warranty
|
Replacement float switch, Piggy back style plug, 115V, Cord Length: 10'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Convert any manual pump to an automatic pump
|
Set includes: 2 each flanges, 2 each flange gaskets, 4 each bolts with nuts
|
Set includes: 2 each flanges, 2 each flange gaskets, 4 each bolts with nuts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy duty contacts, Mechanically activated wide angle switch provides direct control of pumps in potable water, water, and sewage applications, Controls pumps up to 1/2 hp at 120 VAC and 1 hp at 230 VAC, 13 amps running current and 85 amps starting current, Pump down (normally open) applications, Plug connection, Three-year limited warranty
|
Heavy-duty contacts, Mechanically activated wide angle switch provides direct control of pumps in potable water, water, and sewage applications, Controls pumps up to 1/2 hp at 120 VAC and 1 hp at 230 VAC, 13 amps running current and 85 amps starting current, Pump down (normally open) applications, Plug connection, Three-year limited warranty
|
GF 15/26, Dielectric isolation valve sets, Set includes: 2 each rotating flanges, 2 each lever handle ball valve, 2 each dielectric sleeve, 2 each EPDM gaskets, 4 each bolts with nuts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mechanically activated narrow angle switch designed to activate pump control panels and alarms in potable water, water, and sewage applications, 5 amps, 125/250 VAC, 50/60 Hz, Normally open - closes when float tips slightly above horizontal and opens when float tips slightly below horizontal, Not sensitive to rotation, Externally weighted, Three-year limited warranty
|
For Grundfos ALPHA, UP, and UPS pumps with a GF 15/26 flange connection, Dielectric isolation valve sets, Set includes: 2 each rotating flanges, 2 each lever handle ball valve, 2 each dielectric sleeve, 2 each EPDM gaskets, 4 each bolts with nuts
|
4.5" L x 9" H x 4.5" D, Connection: Barbed, Pump Material: Flame resistant engineered thermal plastic, 115V, Heavy-duty concentric fan-cooled motor with over-sized sleeve bearings and moisture proof windings, Flame retardant housing, Universal mounting configurations, Low pump down and recovery levels, UR listed
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement float switch, Piggy back style plug, 115V, Cord Length: 10'
|
Operates submersed, Inlet screen helps protect pump from debris, Impedance protected motor, Six foot power cord
|
Set includes: 2 each flanges, 2 each flange gaskets, 4 each bolts with nuts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pro-Fit[TM], Stainless steel faceplate and shaft, Heavy bronze sleeve, Nitrile lip seal, Replaces Bell & Gossett and Armstrong pumps or parts, Compatible Series: 100 (75-150), S-25 & 816019 002, Assembly: A
|
Monitors liquid levels in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, and other water applications, Easy to install liquid level alarm system for indoor use with auto-reset and battery backup features
|
Set includes: 2 each flanges, 2 each flange gaskets, 8 each bolts with nuts
|
|
|
