Name: AJs Wholesale Global One Logistics LLC
Address: 4410 East Claiborne Square, STE 334, Hampton, VA, 23666, USA
Telephone: +1-757-251-3880

You are here: Home > Industrial > Mro And Consumables > Chemicals, Compounds And Accessories > Lubricating Compounds And Fluids

Choose a sub category:

Greases	Oils	Other Lubricants
Pipe Joining Lubricants

Sort By:

Page of 1


2 oz Plumber's Grease List Price: $4.44 Our Price: $2.81 You save $1.63!	4 oz LUB Oil List Price: $5.40 Our Price: $3.45 You save $1.95!	2 oz 300 Degress Plumbers Grease List Price: $6.63 Our Price: $3.64 You save $2.99!

Lubricates faucets, valves, and stems, Meets guidelines for mil-g-10924 C, 2 oz	Custom-formulated, multi-purpose lubricating oil made with premium grade mineral oils, Use on motors, circulators and other pumps, sliding parts, bearings, chains, linkage, Squeeze bottle with telescopic extenda-spout, Non-gumming, non-toxic, non-detergent, and will not foam during use, Contains rust and corrosion preventatives, Not for use in internal combustion engines or extreme heat producing operations	Petroleum based valve and faucet grease, For use on steam and hot water; withstands temperatures from -20[DEG] F to 300[DEG] F, Safe for use with potable water, Non-melting, non-hazardous, Lubricates stems of valves, faucets, and ballcocks


8 OZ Wd-40 LUB List Price: $9.25 Our Price: $5.87 You save $3.38!	Silicone Faucet Grease 1/2 OZ List Price: $9.58 Our Price: $5.87 You save $3.71!	1 QT 2 LB Pipe JT LUB NSF New Form List Price: $15.51 Our Price: $9.81 You save $5.70!

Cleans and protects, Loosens rusted parts, Drives out moisture, Straw allows for precision stream, Easy to use and apply	All purpose lubricant, Reduces wear on faucets, valves and pumps, Aids in installation of faucet spouts, o-rings and stem repair kits, 1/2 oz	All purpose, biodegradable pipe lubricant, Can be used to assemble pipes made of cast iron, concrete, plastic and clay pipe, Can be applied in temperatures from -10[DEG]F to 150[DEG]F, Contains no petroleum, phosphate or silicone and will not support bacteria growth, Water dispersible and can be washed or rinsed from surfaces easily, Less odor, Minimal to no separation, Clings well to almost any surface


1 QT DARK Cut Oil List Price: $16.88 Our Price: $10.67 You save $6.21!	32 oz DARK Cutting Oil SPD Thread List Price: $21.21 Our Price: $12.75 You save $8.46!	8 oz Copper Anti-seize Compound List Price: $20.23 Our Price: $12.78 You save $7.45!

Penetrates quickly and keeps dies cool and protected even after being recycled, Free-flowing, non-clogging formula for easy pumping in automatic systems, K-11 additive provides increased lubricity for longer die life, Formulated with sulfur to facilitate the cutting of sharp, unbroken threads during hand threading or low rpm threading machine operations	Formulated for high cutting machines, A special mixture of sulfonated and chlorinated oils provides high film strength, Keeps machines running cooler and extends the life of your dies, Anti-mist and non-staining formula is not affected by weather, 32 oz	Copper-Rich[TRADEM], 8 oz, Highly conductive: ideal for electrical connections of all types, Highly adhesive on both wet and dry surfaces, Resists seizure for easy breakout on all metal connections including stainless steel from -65[DEG] F (-54[DEG] C) to 1800[DEG] F (982[DEG] C), Exceeds military specification MIL-A-907E


07732 Silicone Spray Adhesive Clear 24 oz List Price: $24.42 Our Price: $14.00 You save $10.42!	Aerosol Threading Oil List Price: $24.20 Our Price: $15.09 You save $9.11!	Food GRD Anti-seize LUB List Price: $25.61 Our Price: $16.17 You save $9.44!

3M[TRADEM] Silicone Spray Low VOC 60%, Lubricates machinery, moving parts, eliminates squeaks caused by friction, prevents sticking, freezing and protects against rust, Rubber protecting, plastic preservation, metal protecting, metal sealing and lubricating, Helps prevent build-up of glues, wax, inks and paints, Helps contribute to LEED[REG] credits, Meets CARB/OTC VOC requirements	Extreme performance, Cools threads and pipe during operation, Speeds metal removal, Improves thread quality, Reduces threading torque, Formulated to produce superior quality threads on stainless steel and black pipe	Food-Grade, 16 oz, Off-white, Lead and metal free, Prevents rust and corrosion, May be used with potable water, Conforms to FDA regulations CFR-21-178, 3570


1 Gallon Dark Cutting Oil List Price: $38.64 Our Price: $24.04 You save $14.60!	1 Gallon DARK Cut Oil List Price: $39.04 Our Price: $24.67 You save $14.37!	1 Gallon Clear Cutting Oil List Price: $41.89 Our Price: $26.09 You save $15.80!

Dark, Cools threads and pipe during operation, Speeds metal removal, Improves thread quality, Reduces threading torque, Traditional mineral oil, Low odor and anti mist formulation, 1 gal	Penetrates quickly and keeps dies cool and protected even after being recycled, Free-flowing, non-clogging formula for easy pumping in automatic systems, K-11 additive provides increased lubricity for longer die life, Formulated with sulfur to facilitate the cutting of sharp, unbroken threads during hand threading or low rpm threading machine operations, Free-flowing, non-clogging formula for easy pumping in automatic systems, Penetrates quickly and keeps dies cool and protected even after being recycled	Cools threads and pipe during operation, Speeds metal removal, Improves thread quality, Reduces threading torque, Clear mineral oil, Low odor and anti mist formulation, 1 gal


1 Gallon Endura Clear Thread Cut Oil List Price: $45.79 Our Price: $28.52 You save $17.27!	1 Gallon DARK Cutting Oil List Price: $47.22 Our Price: $29.83 You save $17.39!	1 Gallon 8 LB Pipe JT LUB NSF New Form List Price: $50.44 Our Price: $31.89 You save $18.55!

Cools threads and pipe during operation, Speeds metal removal, Improves thread quality, Reduces threading torque, 1 gal	Dark cutting oil is a blend of high-quality mineral oils with a sulfur base, used for cutting of sharp, unbroken threads during hand threading or low rpm threading machine operations on small sizes of steel and brass pipe, Contains no nitrosamine-forming compounds or chlorine additives, Excellent lubrication for cutting sharp threads, NSF registered/USDA authorized	All purpose, biodegradable pipe lubricant, Can be used to assemble pipes made of cast iron, concrete, plastic and clay pipe, Can be applied in temperatures from -10[DEG]F to 150[DEG]F, Contains no petroleum, phosphate or silicone and will not support bacteria growth, Water dispersible and can be washed or rinsed from surfaces easily, Less odor, Minimal to no separation, Clings well to almost any surface


1 Gallon Stainless Steel Thread Oil List Price: $56.57 Our Price: $35.23 You save $21.34!	5 Gallon 40 LB Pipe JT LUB NSF New Form List Price: $204.78 Our Price: $129.48 You save $75.30!

Extreme performance, Cools threads and pipe during operation, Speeds metal removal, Improves thread quality, Reduces threading torque, Formulated to produce superior quality threads on stainless steel and black pipe	All purpose, biodegradable pipe lubricant, Can be used to assemble pipes made of cast iron, concrete, plastic and clay pipe, Can be applied in temperatures from -10[DEG]F to 150[DEG]F, Contains no petroleum, phosphate or silicone and will not support bacteria growth, Water dispersible and can be washed or rinsed from surfaces easily, Less odor, Minimal to no separation, Clings well to almost any surface