|
|
|
|
|
|
|
|
|
|
|
5-pin and drilled for 6 pin, Furnished with Ilco[REG] Look Alike[REG] keys, Rekeyable to original manufacturer's system, Thread size is 1.150" x 32 UNS, For Kwikset[REG] systems
|
5-pin and drilled for 6 pin, Furnished with Ilco[REG] Look Alike[REG] keys, Rekeyable to original manufacturer's system, Thread size is 1.150" x 32 UNS, For Kwikset[REG] systems
|
5-pin and drilled for 6 pin, Furnished with Ilco[REG] Look Alike[REG] keys, Rekeyable to original manufacturer's system, Thread size is 1.150" x 32 UNS, For Schlage[REG] systems
|
|
|
|
|
|
|
|
|
|
|
|
|
5-pin and drilled for 6 pin, Furnished with Ilco[REG] Look Alike[REG] keys, Rekeyable to original manufacturer's system, Thread size is 1.150" x 32 UNS, For Schlage[REG] systems
|
For doors 1 3/8" to 2 1/4" thick, Includes trim ring, mounting plate and break-off screws, 5-pin and drilled for 6 pin, Furnished with Ilco[REG] Look Alike[REG] keys, Rekeyable to original manufacturer's system, For Kwikset[REG] systems
|
For doors 1 3/8" to 2 1/4" thick, Includes trim ring, mounting plate and break-off screws, 5-pin and drilled for 6 pin, Furnished with Ilco[REG] Look Alike[REG] keys, Rekeyable to original manufacturer's system, For Kwikset[REG] systems
|
|
|
|
|
|
|
|
|
|
|
|
|
For doors 1 3/8" to 2 1/4" thick, Includes trim ring, mounting plate and break-off screws, 5-pin and drilled for 6 pin, Furnished with Ilco[REG] Look Alike[REG] keys, Rekeyable to original manufacturer's system, For Schlage[REG] systems
|
For doors 1 3/8" to 2 1/4" thick, Includes trim ring, mounting plate and break-off screws, 5-pin and drilled for 6 pin, Furnished with Ilco[REG] Look Alike[REG] keys, Rekeyable to original manufacturer's system, For Schlage[REG] systems
|
Kwikset[REG] 1176 key blank
|
|
|
|
|
|
|
|
|
|
|
|
|
National 1069L key blank
|
Schlage[REG] 1145 key blank
|
Bommer R1003M key blank
|
|
|
|
|
|
|
|
|
|
|
|
|
Corbin 1003M key blank
|
Soft-touch brush fits all Ilco[REG] machines, Nylon brushes are safer and last longer than conventional wire brushes
|
Milling type cutter, Fits the I008 key duplication machine
|
|
|
|
|
|
|
|
|
|
|
|
|
Milling type cutter, Fits the I040HD110 and I045HD110 key duplication machines
|
Manual operation, Super Jaw 3, ?secure grip?, four-position vise jaws, Wide spacing between vise jaws accommodates longer keys, Permanently lubricated cutter spindle shaft ball bearings, Dial type depth adjustment system greatly simplifies calibration and improves accuracy, Durable titanium nitride coated cutter, Built in circuit breaker protection, Soft -touch deburring brush
|
Dual function (automatic or manual) operation, Super Jaw 3, ?secure grip?, four-position vise jaws, Accommodates large bow and long blade keys, Permanently lubricated cutter spindle shaft ball bearings, Titanium coated cutter, Dial type depth adjustment system, Built in circuit breaker protection, Soft -touch deburring brush
|
|