|
|
|
|
|
|
|
|
|
|
|
3/8" hex shank, 1/2" - 20 thread, For hole saws 9/16" to 1 3/16" diameter, 3/8" hex shank for greater gripping capability in the chuck, Standard pilot 49 56 8010
|
Hardened carbon steel for strength, Split point pilot drill for faster penetration and less walking, Shank Type: 3 sided, Shank Size: 1/4" & larger
|
Removes plastic pipe from plastic fittings, The rate of cut will depend on the RPM and power of the drill along with the amount of pressure applied to the drill while reboring, To be used with schedule 40 applications only
|
|
|
|
|
|
|
|
|
|
|
|
|
Removes plastic pipe from plastic fittings, The rate of cut will depend on the RPM and power of the drill along with the amount of pressure applied to the drill while reboring, To be used with schedule 40 applications only
|
Hardened carbon steel for strength, Split point pilot drill for faster penetration and less walking, Shank Type: Hex, Shank Size: 1/2" & larger
|
Hardened carbon steel for strength, Split point pilot drill for faster penetration and less walking, Shank Type: Hex, Shank Size: 3/8" & larger
|
|
|
|
|
|
|
|
|
|
|
|
|
Material: carbon steel, ICE HARDENED[TRADEM] cryogenically treated for up to 50% longer life, Optimized tooth form for up to 2X faster cutting, Wide, angled and offset slots for easy plug access, Bi-metal construction with 8% cobalt for increased wear resistance, Works with the following arbors: M49567210, M49566950, M49567000 and M49567010
|
Arbor for Milwaukee[REG] Big Hawg[TRADEM], Reduced pilot bit shank delivers easy plug removal, Increased pilot bit clearance
|
Hex shank prevents slipping in chuck, Permits fast interchanging of hole saws, Thread size: 5/8"-18, Recommended for hole saws 1 1/4" and larger, For use with these hole saw arbors: M49566950, M49567000, M49567055, M49567130 and M49567140
|
|
|
|
|
|
|
|
|
|
|
|
|
Removes plastic pipe from plastic fittings, The rate of cut will depend on the RPM and power of the drill along with the amount of pressure applied to the drill while reboring, To be used with schedule 40 applications only
|
Removes plastic pipe from plastic fittings, The rate of cut will depend on the RPM and power of the drill along with the amount of pressure applied to the drill while reboring, To be used with schedule 40 applications only
|
Hardened carbon steel for strength, Split point pilot drill for faster penetration and less walking, Shank Type: Hex, Shank Size: 3/8" & larger
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened carbon steel for strength, Split point pilot drill for faster penetration and less walking, Shank Type: Hex, Shank Size: 1/2" & larger
|
Hardened carbon steel for strength, Split point pilot drill for faster penetration and less walking, Shank Type: Solid/Hex, Shank Size: 1/2" & larger
|
Tighter access with your current drill/driver, Sure set system floating magnet secures fastener
|
|
|
|
|
|
|
|
|
|
|
|
|
Hardened carbon steel for strength, Split point pilot drill for faster penetration and less walking, Shank Type: Hex, Shank Size: 3/8" & larger
|
1/4", Material: High speed steel, Compact design, Durable all-metal housing and steel gears, Rated up to 235 in-lbs of torque, Accepts standard 1/4" hex shank bits
|
SAE, 15 piece set, 1/2" drive, 6 point, Includes 3/8" - 1 1/4" in 1/16" increments, The TorquePlus[TRADEM] design
|
|