|
|
|
|
|
|
|
|
|
|
|
Fuel type: MAP-PRO[TRADEM] or propane, For disposable cylinders, Adjustable flame
|
Fuel type: MAP-PRO[TRADEM] or propane, Hot turbine flame, Brass regulator, Filtered orifice to prevent clogging, Interchangeable tips, Includes GGHTT1 standard single tip
|
Fuel type: MAP-PRO[TRADEM] or propane, Hot turbine flame, Brass regulator, Filtered orifice to prevent clogging, Interchangeable tips, Includes GGHTTL piezo lighter tip
|
|
|
|
|
|
|
|
|
|
|
|
|
Features a 360 degree swivel tip and easy to clean orifice, ST-33 self lighting tip, STK-R regulator CGA-600 connection, For use with propane or Map-Pro, High capacity and HVAC applications, Soft solders 1/4" to 3" on propane, 1/4" to 3-1/2" using MAPP, Silver Brazes 1/4" to 1" on propane, 1/4" to 1-3/4" using MAPP
|
Fuel type: MAP-PRO[TRADEM] or propane, Hot turbine flame, Brass regulator, Filtered orifice to prevent clogging, Interchangeable tips, Includes GGHTT2 twin tip
|
Fuel type: MAP-PRO[TRADEM] or propane, Self igniting, Replaceable brass tip
|
|
|
|
|
|
|
|
|
|
|
|
|
Features a 360 degree swivel tip and easy to clean orifice, ST-33 self lighting tip, STK-R regulator CGA-600 connection, For use with propane or Map-Pro, High capacity and HVAC applications, Soft solders 1/4" to 3" on propane, 1/4" to 3-1/2" using MAPP, Silver Brazes 1/4" to 1" on propane, 1/4" to 1-3/4" using MAPP
|
Convenient self-lighting triggers, CGA-600 connection, For use with propane or MAP-Pro cylinders, Propane soft solders 1/8" to 2", Propane silver brazes 1/16" to 3/4", MAPP soft solders 1/8" to 3", MAPP silver brazes 1/16" to 1", Quick disconnect couplings between handle and tips
|
Fuel type: MAP-PRO[TRADEM] or propane, Hot turbine flame, Brass regulator, Filtered orifice to prevent clogging, Interchangeable tips, Includes Y tip
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable construction, Uses 2000 and 3000 series welding/brazing tips
|
Convenient self-lighting triggers, CGA-600 connection, For use with propane or MAP-Pro cylinders, Propane soft solders 3/4" to 3", Propane silver brazes 1/4" to 1", MAPP soft solders 3/4" to 4", MAPP silver brazes 1/4" to 1-1/4", Quick disconnect couplings between handle and tips
|
Neck length: 7 3/4", "A" fitting connection, Adjustable needle valve, Brass
|
|
|
|
|
|
|
|
|
|
|
|
|
Soft solder 1/4" - 1/2", Includes BA-3 feather flame tip, regulator with "B" cylinder fitting, hose, handle lighter, and wrench, Adjustable flame, Screw-in style tips
|
Can be used to pressure check HVAC and Refrigeration lines, flush drainage lines, blow clean components and purge prior to brazing to protect from oxidation, Includes: regulator, cone tips, turbo tornado tip, blow gun, hoses, needle tip and CO2 adapter
|
Fuel type: MAP-PRO[TRADEM] or propane, Easy carry stand with dual cylinder cradles and hose winder, Spare cylinder storage, Includes GT-4L turbine flame igniter tip, regulator, hose, quick connect handle, and carry stand
|
|
|
|
|
|
|
|
|
|
|
|
|
Snap-in style tips, Push button ignition tip, Soft soldering up to 1 1/2" and brazes up 3/4", Includes GA-8L turbine igniter tip, hose, quick connect handle, wrench, and regulator with "B" cylinder fitting
|
Durable tool bag, Includes self lighting PL-3T tip, STK-R regulator CGA-600, 12' of hose and hose clamp, Ergonomically designed handle, Bonus items include PL-4T tip, PL-812 heat shield and Viper SX solder
|
Used by heating, cooling, refrigeration, repair shops and industry contractors, Includes rear valve torch, precise needle valve control and superior valve stems, Constant and accurate gas flow, Torch, regulators, and hose have size "A" fittings
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by heating, cooling, refrigeration, repair shops and industry contractors, Includes front valve torch, precise needle valve control and superior valve stems, Constant and accurate gas flow
|
Includes A-5 tip, Soft solders to 1 1/2", Silver brazes 3/4", AR-B (CGA 520) Regulator, High capacity and HVAC applications, Tips feature quick disconnect couplings and color coded o-rings for gas identification
|
Snap-in style tips, Soft soldering up to 3" and braze up to 1 1/2", Includes GA-3 and GA-11 turbine flame tips, hose, quick connect handle, wrench, and regulator with "B" cylinder fitting
|
|
|
|
|
|
|
|
|
|
|
|
|
Organize, store and transport your TurboTorch[REG] Air Acetylene equipment and B tank, Kit includes a durable tote case, PL-8A and A3 tips, G4 torch handle, AR-B regulator and AH-12 hose, Durable lifting handle and telescoping pull handle, Multiple storage pockets including one metal sleeve for hot tip storage, Adjustable vehicle security strap, Stable, lightweight and non-corrosive base
|
Snap-in style tips, Soft soldering up to 4" and braze up to 2", Includes GA-5 and GA-14 turbine flame tips, hose, quick connect handle, wrench, and regulator with "B" cylinder fitting
|
Includes A-3 and A-11 tips, Soft solders to 3", Silver brazes to 1 5/8", AR-B (CGA 520) Regulator, High capacity and HVAC applications, Tips feature quick disconnect couplings and color coded o-rings for gas identification
|
|
|
|
|
|
|
|
|
|
|
|
|
Perfect for transporting B tanks to various jobs, Convenient storage of hose handle, tips and other accessories for HVAC and plumbing, Kit includes: Piston Regulator with TANKTOTE Handle, GAUGEGUARD, TANKTOTE Sleeve, 12 1/2' Hose, AA Handle, and AA800 5/16" Self-igniting Swirl Flame Tip, This kit includes A5 1/4 In and A14 1/2 in swirl flame tips, Tank not Included
|
Combines Extreme Swirl Technology[TRADEM] with a traditional manual lighting torch, Soft solders to 3 1/2", Silver brazes to 2", AR-B (CGA 520) Regulator for use with B tank, High capacity and HVAC applications, Tips feature quick disconnect couplings and color coded o-rings for gas identification
|
Perfect for transporting B tanks to various jobs, Convenient storage of hose handle, tips and other accessories for HVAC and plumbing, Kit includes: Piston Regulator, GAUGEGUARD, TANKTOTE Handle, TANKTOTE Sleeve, 12 1/2' Hose, AA Handle, and A5 1/4" and A14 1/2" Swirl Flame Tips, This kit includes A5 1/4 In. and A14 1/2 in. swirl flame tips, Tank not Included
|
|
|
|
|
|
|
|
|
|
|
|
|
95 amp stick welding system (TIG capable), 120V input voltage, Electrode range: 1/16" - 3/32", Weighs 9.7 lbs, Includes: power supply, electrode holder, ground clamp and carrying case
|
160 amp Stick/TIG welding system, Dual voltage 120V/230V input voltage, Weighs 17.4 lbs, Includes: power supply, TIG torch, regulator, electrode holder, ground clamp and carrying case
|
200 amp Stick/TIG welding system, Dual voltage 120V/230V input voltage, Features optimized hot start and user adjustable arc-force circuits, Features lift TIG or High Frequency and includes a trigger hold feature (2T/4T), Weighs 21.6 lbs, Includes: power supply, TIG torch, regulator, electrode holder, ground clamp and carrying case
|
|