|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic standard base flashing, Non-fading, non-cracking, rigid black thermoplastic base, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar or plastic base. Not for hot-mopped or built-up roofs, Plastic base for pitch from 0 45[DEG] or up to 12/12 roof, Rated 180[DEG] F continuous heat and approved for Type B installations
|
Plastic standard base flashing, Non-fading, non-cracking, rigid black thermoplastic base, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar or plastic base. Not for hot-mopped or built-up roofs, Plastic base for pitch from 0 45[DEG] or up to 12/12 roof, Rated 180[DEG] F continuous heat and approved for Type B installations
|
Plastic standard base flashing, Non-fading, non-cracking, rigid black thermoplastic base, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar or plastic base. Not for hot-mopped or built-up roofs, Plastic base for pitch from 0 45[DEG] or up to 12/12 roof, Rated 180[DEG] F continuous heat and approved for Type B installations
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic standard base flashing, Non-fading, non-cracking, rigid black thermoplastic base, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar or plastic base. Not for hot-mopped or built-up roofs, Plastic base for pitch from 0 45[DEG] or up to 12/12 roof, Rated 180[DEG] F continuous heat and approved for Type B installations
|
Dektite[REG] is flexible, weatherproof and long lasting, Does not crack or break resulting in less building maintenance, Flexible base conforms to several panel profiles for fewer leaks, Pipe diameter markings can be custom sized on the job site, Fits pipes with an outside diameter of 1/4" to 2"
|
SideFlash[TRADEM] vertical flashings can be used in commercial and residential applications where a watertight seal of piping penetrations through outside walls is required, Designed with a tear out collar to accommodate pipe size use from 1/2? to 2 1/2 "
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
No-calk solar flashing slides over piping penetrations, Non-fading sealing collar, Not for hot-mopped or built-up installations
|
Made of long-life, flexible, weatherproof gray EPDM rubber that will not crack or break, Flexible, corrosion resistant aluminum base, Pipe diameter marking indication, Adjustable pleated cone allows for flexibility, Fits pipes with an outside diameter of 1 3/4" to 3"
|
No-calk solar flashing slides over piping penetrations, Non-fading sealing collar, Not for hot-mopped or built-up installations
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic code base flashing, Non-fading, non-cracking, rigid black thermoplastic base, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar or plastic base. Not for hot-mopped or built-up roofs, Plastic base for pitch from 0 45[DEG] or up to 12/12 roof, Rated 180[DEG] F continuous heat and approved for Type B installations, 18" X 18"
|
All flash highrise flashing, Ideal for steep pitch roofs with non-fading, non-cracking, rigid black thermoplastic base, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar or plastic base. Not for hot-mopped or built-up roofs, Plastic base for pitch from 10 60[DEG] or up to 12/12 roof, Rated 180[DEG] F continuous heat and approved for Type B installations
|
Dektite[REG] is flexible, weatherproof and long lasting, Does not crack or break resulting in less building maintenance, Flexible base conforms to several panel profiles for fewer leaks, Pipe diameter markings can be custom sized on the job site, Fits pipes with an outside diameter of 1/4" to 4"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum standard base flashing, Rustproof stamped aluminum allows for easy shaping of flashing, Rated 180[DEG] F continuous heat and approved for Type B installations, Metal base for pitch from 0 40[DEG] or up to 10/12 roof, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar. Not for hot-mopped or built-up roofs
|
SideFlash[TRADEM] vertical flashings can be used in commercial and residential applications where a watertight seal of piping penetrations through outside walls is required, Designed with a tear out collar to accommodate pipe size use from 3? to 6?
|
Plastic code base flashing, Non-fading, non-cracking, rigid black thermoplastic base, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar or plastic base. Not for hot-mopped or built-up roofs, Plastic base for pitch from 0 45[DEG] or up to 12/12 roof, Rated 180[DEG] F continuous heat and approved for Type B installations, 18" X 18"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aluminum standard base flashing, Rustproof stamped aluminum allows for easy shaping of flashing, Rated 180[DEG] F continuous heat and approved for Type B installations, Metal base for pitch from 0 40[DEG] or up to 10/12 roof, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar. Not for hot-mopped or built-up roofs
|
Can be used with any air admittance valve requiring a recessed installation, Grille faceplate allows air movement to the Sure-Vent[REG] while the box offers protection and access to the Sure-Vent[REG] behind the drywall, High impact polystyrene construction, Accommodates 6 or 20 DFU
|
Aluminum standard base flashing, Rustproof stamped aluminum allows for easy shaping of flashing, Rated 180[DEG] F continuous heat and approved for Type B installations, Metal base for pitch from 0 40[DEG] or up to 10/12 roof, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar. Not for hot-mopped or built-up roofs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recess box and grille ideally suited for in-wall installation of Mini-Vent[REG]
|
All flash highrise flashing, Ideal for steep pitch roofs with non-fading, non-cracking, rigid black thermoplastic base, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar or plastic base. Not for hot-mopped or built-up roofs, Plastic base for pitch from 10 60[DEG] or up to 12/12 roof, Rated 180[DEG] F continuous heat and approved for Type B installations
|
Allows access to Sure-Vent[REG] air admittance valve, Fits Oatey Sure-Vent[REG] models - 6, 20, 160 DFU, Accommodates 1 1/2", 2" or 3" adapters through box opening, Provides louvered metal grille faceplate to conceal the AAV, Material: High Impact Polystyrene/Metal
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made of long-life, flexible, weatherproof gray EPDM rubber that will not crack or break, Flexible, corrosion resistant aluminum base, Pipe diameter marking indication, Adjustable pleated cone allows for flexibility, Fits pipes with an outside diameter of 3" to 6"
|
Aluminum standard base flashing, Rustproof stamped aluminum allows for easy shaping of flashing, Rated 180[DEG] F continuous heat and approved for Type B installations, Metal base for pitch from 0 40[DEG] or up to 10/12 roof, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar. Not for hot-mopped or built-up roofs
|
Made of long-life, flexible, weatherproof gray EPDM rubber that will not crack or break, Flexible, corrosion resistant aluminum base, Pipe diameter marking indication, Adjustable pleated cone allows for flexibility, Fits pipes with an outside diameter of 4" to 7"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AAV Wall Box, AAV not included, Includes metal grille face plate and screws, Made in the USA
|
Master flash roof flashing, Engineered for profiled roofing systems at any pitch, Rated 212[DEG] F continuous heat, Approved for Type B installations, Easily customized to accommodate a broad range of pipe diameters
|
Master flash roof flashing, Engineered for profiled roofing systems at any pitch, Rated 212[DEG] F continuous heat, Approved for Type B installations, Easily customized to accommodate a broad range of pipe diameters
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Master flash roof flashing, Engineered for profiled roofing systems at any pitch, Rated 212[DEG] F continuous heat, Approved for Type B installations, Easily customized to accommodate a broad range of pipe diameters
|
Aluminum code base flashing, Rustproof stamped aluminum allows for easy shaping of flashing, Rated 180[DEG] F continuous heat and approved for Type B installations, Metal base for pitch from 0 40[DEG] or up to 10/12 roof, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar. Not for hot-mopped or built-up roofs, 18" X 18"
|
Aluminum code base flashing, Rustproof stamped aluminum allows for easy shaping of flashing, Rated 180[DEG] F continuous heat and approved for Type B installations, Metal base for pitch from 0 40[DEG] or up to 10/12 roof, Self-sealing collar slides over pipe and requires no caulking, Do not use petroleum based products or paint on flashing collar. Not for hot-mopped or built-up roofs, 18" X 18"
|
|
|
