|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use on sinks, tubs and showers, 1 1/2" MPT, ABS construction
|
Mechanical vent installs on the drain line and vents the line without allowing sewer gas to enter the home, For venting sinks, tubs, showers, washing machines, etc, Eliminates need for secondary stacks, Material: Black ABS
|
Magic Vent[REG], PVC, Eliminates roof penetrations, Multiple use applications, Code allowed, Double guide system
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Redi-Vent with tubular adapter tee, For installation in-line on a p-trap, Fits both 1 1/2? and 1 1/4? traps, Compact design for tight application, Sets REDI-VENT[REG] 4? above the drain as required by code
|
For use as a secondary vent, One size approved to handle up to 2" vent pipe, Opens/closes as needed by building's plumbing system, Height: 3.80", Width: 2.62", ASSE Standards: ASSE 1050, ASSE 1051
|
For use as a secondary vent, One size approved to handle up to 3" vent pipe, Opens/closes as needed by building's plumbing system, End connection: Threaded, ASSE Standards: ASSE 1050, ASSE 1051
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TurboVent[TRADEM], 1 1/2" x 2" DWV Combo Adapter, Actuating device within the unit spins with each activation, keeping the seal free of dust and debris, Quick opening air valve at 0.01" negative pressure, Positive seal with 13 psi of back pressure, Certifications: ASSE 1050 and ASSE 1051, American made
|
6 DFU, 1 1/2" Sch 40 adapter, For venting 2" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
6 DFU, 1 1/2" Sch 40 adapter, For venting 2" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 DFU, 1 1/2" x 2" Sch 40 adapter, For venting 2" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
20 DFU, 1 1/2" x 2" Sch 40 adapter, For venting 2" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
6 DFU, 1 1/2" polyproplyene tubular adapter, For venting 2" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 DFU, 1 1/2" polyproplyene tubular adapter, For venting 2" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
160 DFU, 2" x 3" Sch 40 adapter, For venting 4" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
160 DFU, 2" x 3" Sch 40 adapter, For venting 4" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
500 DFU, 3" x 4" Sch 40 adapter, For venting 4" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
500 DFU, 3" x 4" Sch 40 adapter, For venting 4" DWV and smaller, Includes screening on air inlets to protect the seal, Made in the USA
|
Acceptable as an alternative to extending a vent through the roof or sidewall to the open atmosphere, Ball valve sealing assembly, Will vent up to 6 DFUs, Designed for chemical waste systems, Screening on the inside and outside of the valve to protect the sealing assembly from insects and debris, Lifetime limited warranty for replacement of defective valves
|
|
|
