|
|
|
|
|
|
|
|
|
|
|
|
|
|
UPC certified, American made
|
4" X 3", One piece design, Fits over 3" or inside 4" SCH 40 DWV pipe, Allows for flush installation inside 4" pipe, Provides a simple push and peel back test cap that won't fall down the drain, No hammer required to remove test cap, Solvent weld connection
|
Flush to floor, Knockout will not break apart and cannot fall down drain pipe, Corrosion-resistant stainless steel swivel ring is engineered for maximum strength, Holds 5 floors (22 psi) for head test, UPC certified, American made
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits inside of 4" or over 3" Schedule 40 DWV pipe, Includes test cap that removes by tapping on hammer icons, breaks out in one piece, Built-in catch teeth prevents the test cap from falling down into the DWV line, Four mounting slots for closet bolts and four countersunk holes for secure attachment to the floor
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits inside of 4" or over 3" Schedule 40 DWV pipe, Includes test cap that removes by tapping on hammer icons, breaks out in one piece, Built-in catch teeth prevents the test cap from falling down into the DWV line, Four mounting slots for closet bolts and four countersunk holes for secure attachment to the floor
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4" X 3", Two piece floating stainless steel ring design, Fits over 3" or inside 4" SCH 40 DWV pipe, Allows for flush installation inside 4" pipe, Provides a simple push and peel back test cap that won't fall down the drain, No hammer required to remove test cap, Solvent weld connection
|
Flush to floor, Knockout will not break apart and cannot fall down drain pipe, Corrosion-resistant stainless steel swivel ring is engineered for maximum strength, Holds 5 floors (22 psi) for head test, UPC certified, American made
|
Fits inside of 4" or over 3" Schedule 40 DWV pipe, Includes test cap that removes by tapping on hammer icons, breaks out in one piece, Built-in catch teeth prevents the test cap from falling down into the DWV line, Four mounting slots for closet bolts and four countersunk holes for secure attachment to the floor
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Size: 4" X 4", Fitting Type: Solder/Solvent, SCH 40 PVC, End Connections: Hub, Manufactured from virgin rigid PVC (polyvinyl chloride) compounds with a Cell Class of 12454 as identified in ASTM D-1784, Overall Diameter: 7", For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications, Intended for non-pressure applications where the operating temperature will not exceed 140[DEG] F
|
Allows 1 1/2" offset in any direction, Corrosion-resistant stainless steel ring, Full-flow, 3" I.D. throat - no restriction, Fits flush-to-floor through any 4" opening, UPC listed, American made
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Size: 4" X 3", PVC, ASTM Specifications: ASTM D-1784, ASTM D-2665, ASTM D-3311
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
Replaces broken cast iron closet flanges, Installs easily without tools, No need to tear up existing floor, Smooth unrestricted flow design, Gasket expands to fit service weight, heavy weight and no hub
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Perfect for replacement or new installations, Gasket seals inside DWV pipe, Easy installation, Push Tites have larger outlets than other gasketed closet flanges, Smooth inner walls with no obstructions or ledges to cause clogs
|
For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
|
Replaces broken cast iron closet flanges, Installs easily without tools, No need to tear up existing floor, Smooth unrestricted flow design, Gasket expands to fit service weight, heavy weight and no hub
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fitting Type: Solder/Solvent, SCH 40 PVC, End Connections: Spigot, Overall Diameter: 7", For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications, Intended for non-pressure applications where the operating temperature will not exceed 140[DEG] F, Manufactured from virgin rigid PVC (polyvinyl chloride) compounds with a Cell Class of 12454 as identified in ASTM D-1784, ASTM Specifications: ASTM D-1784, ASTM D-2665, ASTM D-3311, NSF/ANSI Standard 14 compliant
|
Size: 4" X 3", Fitting Type: Solder/Solvent, SCH 40 PVC, End Connections: Hub, Manufactured from virgin rigid PVC (polyvinyl chloride) compounds with a Cell Class of 12454 as identified in ASTM D-1784, Overall Diameter: 7", For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications, Intended for non-pressure applications where the operating temperature will not exceed 140[DEG] F
|
Strong, adjustable stainless steel swivel ring means you adjust the ring, not the flange, No chance of breaking gasket seal, Engineered elastomer gasket is chemical and heat resistant, All models have larger flow-through areas than similar gasketed closet flanges
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Size: 4" X 3", Fitting Type: Solder/Solvent, SCH 40 PVC, End Connections: Hub, For use where systems will not exceed 140[DEG] F, Overall Diameter: 7", White pipe with red print is Dual Marked[TRADEM] for DWV and pressure applications, For sanitary drain, waste and vent (DWV), sewer and storm drainage applications
|
Fitting Type: Solder/Solvent, SCH 40 PVC, End Connections: Spigot, Overall Diameter: 7", For sanitary drain, waste, and vent (DWV), sewer and storm drainage applications, Intended for non-pressure applications where the operating temperature will not exceed 140[DEG] F, Manufactured from virgin rigid PVC (polyvinyl chloride) compounds with a Cell Class of 12454 as identified in ASTM D-1784, ASTM Specifications: ASTM D-1784, ASTM D-2665, ASTM D-3311, NSF/ANSI Standard 14 compliant
|
|
|
