|
|
|
|
|
|
|
|
|
|
|
1/2", 3/4" or 1" holes, 20 gauge, copper bonded steel, Positions copper, PEX or CPVC water supplies, Hole pattern on 90[DEG] base, Bracket can be mounted directly to flat surface or suspended from 3/8" ATR
|
Low cost, one minute, pipe support solution, No tools or hardware required for use with 251 clamp
|
4 1/2" x 2 5/8" x 1", Galvanized coating, Galvanized steel bracket that supports one copper, PEX or CPVC tube, Supports parallel lines of copper, PEX or CPVC tubing vertically, horizontally, and overhead
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized coating, Supports one copper, PEX or CPVC tube, Supports parallel lines of copper, PEX or CPVC tubing vertically, horizontally, and overhead
|
2" x 1 3/4" x 1 1/2", Galvanized coating, Galvanized steel bracket that supports one copper, PEX or CPVC tube, Supports parallel lines of copper, PEX or CPVC tubing vertically, horizontally, and overhead
|
3" x 1 3/4" x 3/4", Galvanized coating, Galvanized steel bracket that supports one copper, PEX or CPVC tube, Supports parallel lines of copper, PEX or CPVC tubing vertically, horizontally, and overhead
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized coating, Keyed holes: 1 3/8" and 3 3/8"
|
Galvanized coating, Low cost, one minute, pipe support solution, Supports tubing in vertical and horizontal positions, Ideal for multiple applications
|
Bracket attaches directly to flat surface or suspends from 3/8" all-thread rod, providing height, Provides 2" center line height from structure, Can be cast into concrete slab, then bent into position, Compatible with Holdrite[REG] 400, 261 and 262 inserts, Ideal for dual pipe run applications including Copper, CPVC and PEX.
|
|
|
|
|
|
|
|
|
|
|
|
|
5" x 4 1/2" x 1", Galvanized coating, Galvanized steel bracket that supports two lines of copper, PEX or CPVC tubing, Supports parallel lines of copper, PEX or CPVC tubing vertically, horizontally, and overhead
|
Bracket attaches directly to flat surface or suspends from 3/8" all-thread rod, providing height, Provides 1-1/4" center line height from structure, Can be cast into concrete slab, then bent into position, Compatible with Holdrite[REG] 400, 261 and 262 inserts, Ideal for dual pipe run applications including Copper, CPVC and PEX.
|
5" x 2 1/2" x 2", Galvanized coating, Galvanized steel bracket that supports two lines of copper, PEX or CPVC tubing, Supports parallel lines of copper, PEX or CPVC tubing vertically, horizontally, and overhead
|
|
|
|
|
|
|
|
|
|
|
|
|
4 1/2" x 4" x 1 1/2", Galvanized coating, Supports parallel lines of copper, PEX or CPVC tubing vertically, horizontally, and overhead
|
Bracket has 1-3/8" keyed holes on 2" centers, Versatile bracket ideal for sink, lavatory and water closet plumbing solutions, Integrates with Holdrite[REG] 701 and others
|
Galvanized coating, 1 3/8" keyed holes at 2", 4", 6" and 8"
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized steel bracket provides proper pipe positioning and alignment, Supports CPVC piping, Ideal for lavatory/sink and water closet stub-out support
|
Telescoping design supports CPVC, Copper and PEX tubing, Ideal for shower head, tub spout, vertical mid-span and more, Supports both 2-eared and 3-eared 90's, Integrates with several HOLDRITE[REG] clamps and other industry standard components
|
Centers: 2" with 5/8" holes, Copper Bonded coating, Positions 1/2" CTS pipe
|
|
|
|
|
|
|
|
|
|
|
|
|
1/2", 3/4" or 1" holes, 14 gauge, galvanized steel, Positions copper water supplies for sinks, water closets, and other fixtures
|
1/2" & 3/4" holes, Designed exclusively to support CPVC piping, 20 gauge, galvanized steel
|
1/2" & 3/4" holes, 16 gauge, copper bonded steel, Positions stub-outs at various heights, Also functions as a nail plate
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized steel bracket provides proper pipe positioning and alignment, Ideal for lavatory/sink and water closet stub-out support, Supports CPVC piping
|
Holes on 2" centers for 1/2" tubing and holes on 4" centers for 3/4" & 1" tubing, Ideal for lavatory, water closet and water heater
|
Ideal for lavatory and water closet, Equipped with 5/8" holes on 2" centers
|
|
|
|
|
|
|
|
|
|
|
|
|
Alternating 7/8" and 1-1/8" holes on 4" centers, Ideal for water heater and relief line applications
|
Holes on 2" centers for 1/2" tubing and holes on 4" centers for 3/4" & 1" tubing, Rolled edges for extra strength and extruded holes for additional soldering surface, Ideal for lavatory, water closet and water heater
|
Multi-purpose bracket supports various application solutions, Ideal for lavatory, shower or water closet, Telescoping design supports Copper, PEX, CPVC and many other types of piping, Numerous clamps and fittings integrate onto multiple sides of the Stout bracket for superior strength and versatility, Includes four screws
|
|
|
|
|
|
|
|
|
|
|
|
|
1/2" & 3/4" holes, Designed exclusively to support CPVC piping, 20 gauge, galvanized steel
|
Multi-purpose bracket supports various application solutions, Ideal for lavatory, shower or water closet, Telescoping design supports Copper, PEX, CPVC and many other types of piping, Numerous clamps and fittings integrate onto multiple sides of the Stout bracket for superior strength and versatility, Includes four screws
|
Copper Bonded coating, Flat, Positions 1/2" or 3/4" CTS pipe
|
|