|
|
|
|
|
|
|
|
|
|
|
|
|
|
Regular-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 4" for Sch 40 and up to 2" for Sch 80, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, conduit and DWV and application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2564
|
Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, conduit and DWV and application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2564
|
Medium-bodied black cement for cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter, Lo-V.O.C. Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, For all non-pressure applications. Recommended application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2235
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium-bodied green cement for use in joining ABS to PVC in non-pressure transition joints up to 6" diameter, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-3138
|
Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter, Lo-V.O.C. Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, conduit and DWV and application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2564, ASTM D-2235, ASTM F-493
|
Medium-bodied blue colored cement for PVC pipe and fittings up to 6" diameter, Very fast-setting cement formulated for wet conditions and/or quick pressurization and fast installation, Recommended for ALL grades and types of PVC pipe and fittings, potable water and DWV, No primer needed on non-pressure DWV, up through 4" diameter where local codes permit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 12" diameter, Lo-V.O.C. Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, pressure pipe, conduit and DWV and application temperature 40 110[DEG] F, Thick formula fills gaps in large diameter pipe and loose fitting joints
|
Medium-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6" diameter with interference fit, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended application temperature 40 110[DEG] F, Approved for Corzan CPVC Piping System
|
Regular-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 4" for Sch 40 and up to 2" for Sch 80, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, conduit and DWV and application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2564
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit, For cold water systems and hot water system up to 200[DEG] F, May be used without primer where local codes permit, Recommended application temperature 0[DEG] F to 115[DEG] F
|
Medium-bodied black cement for cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter, Lo-V.O.C. Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, For all non-pressure applications. Recommended application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2235
|
Medium-bodied milky clear cement for ABS, PVC, or CPVC up to 6" diameter, Lo-V.O.C. Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, conduit and DWV and application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2564, ASTM D-2235, ASTM F-493
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, conduit and DWV and application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2564
|
Heavy-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 12" diameter, Lo-V.O.C. Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, pressure pipe, conduit and DWV and application temperature 40 110[DEG] F, Thick formula fills gaps in large diameter pipe and loose fitting joints
|
Medium-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6" diameter with interference fit, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended application temperature 40 110[DEG] F, Approved for Corzan CPVC Piping System
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-bodied gray cement for use on all schedules and classes of PVC pipe and fittings up to 12" diameter with interference fit, Thick formula fills gaps in large diameter pipe and loose fitting joints, Recommended for potable water, conduit and DWV and application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2564
|
Formulated for all classes and schedules with interference fit through 6"diameter and Schedule 80 through 4" diameter, Medium-bodied, fast-setting, low-VOC PVC cement, Can be used without primer on non-pressure systems, With applicator cap
|
Medium-bodied blue colored cement for PVC pipe and fittings up to 6" diameter, Very fast-setting cement formulated for wet conditions and/or quick pressurization and fast installation, Recommended for ALL grades and types of PVC pipe and fittings, potable water and DWV, No primer needed on non-pressure DWV, up through 4" diameter where local codes permit
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium-bodied blue cement, No primer needed, Meets ASTM D2564
|
Formulated for all classes and schedules with interference fit through 6"diameter and Schedule 80 through 4" diameter, Medium-bodied, fast-setting, low-VOC PVC cement, Can be used without primer on non-pressure systems, With applicator cap
|
Regular-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 4" for Sch 40 and up to 2" for Sch 80, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, conduit and DWV and application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2564
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2" diameter interference fit, For cold water systems and hot water system up to 200[DEG] F, May be used without primer where local codes permit, Recommended application temperature 0[DEG] F to 115[DEG] F
|
Formulated for all classes and schedules, Heavy-bodied, medium-setting, low-VOC PVC cement, For fittings with interference fit through 12" diameter (non-pressure applications only up to 18") for plumbing applications, With applicator cap
|
Heavy-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 12" diameter, Lo-V.O.C. Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, pressure pipe, conduit and DWV and application temperature 40 110[DEG] F, Thick formula fills gaps in large diameter pipe and loose fitting joints
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium bodied, fast setting, low VOC ABS cement for all classes and schedules with interference fit through 8 in diameter, For plumbing application, conduit and foam care, With applicator cap
|
Medium-bodied black cement for cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter, Lo-V.O.C. Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, For all non-pressure applications. Recommended application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2235
|
Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, conduit and DWV and application temperature 40 110[DEG] F, ASTM Specifications: ASTM D-2564
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6" diameter with interference fit, Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements, Recommended for potable water, drain, waste and vent systems and application temperature -15 to 110[DEG] F, No primer needed on non-pressure DWV, up through 4" diameter where local codes permit
|
For all classes and schedules, except Schedule 80, Regular-bodied, fast-setting, low-VOC PVC cement, For fittings with interference fit through 4" diameter, With applicator cap
|
Medium-bodied black cement for use on all schedules and classes of ABS pipe and fittings up to 6" diameter with interference fit, Formulated especially for the hot, arid climates in the Western states, Recommended application temperature 40[DEG]F to 110[DEG]F/ 4[DEG]C to 43[DEG]C, ASTM Specifications: ASTM D-2235
|
|
|
